Environmentally Clean Concrete Form Release in Concrete Casting Supplies Environmentally Clean Concrete Concrete Release in Casting Supplies and Products Biodegradable form release for packerhead pipe operations in Concrete Casting Supplies Griflube hydraulic fluids and lubricants in metalworking Supplies and Products

Cast-O-Magic® Rust-O-Guard Rust Preventative

Rust-O-Guard Rust Preventative

is a paraffin-like material can be sprayed or brushed on steel forms to prevent the formation or rust and corrosion on forms in storage, either outside or inside. It can be easily removed with solvent and wiping it off. Available in 1, 5, and 55 gallon drums.

 

Cast-O-Magic® Rust-O-Guard Rust Preventative Specifications

TECHNICAL DATA

Physical Properties are:

  • Flash Point…………...…          120°F
  • Boiling Point………...….. Over 240°F
  • Freeze Temperature………...….-15°F
  • Freeze Damage…………...……None
  • Wt./Gal………………….......  6.89 lbs
  • Viscosity(Centistokes)..   22.5@40°C
  • Color…………………............... Brown
  • Solubility in Water…......….   Insoluble
  • VOC Content…......… 450 Grams/Liter (3.8 Lbs./Gal.)

APPLICATION


Methods:

  • Rust-O-Guard must be agitated or stirred thoroughly before use and occasionally during use.
  • It should be applied by roller, mop, brush, or any conventional method so that surfaces are coated well.
  • It applies easiest at temperatures above 50° F.
  • Application equipment should be cleaned after use with solvent.
  • When forms are put back into service, Rust-O-Guard can be easily removed using naptha, diesel fuel, or other solvent and wiping it off. Forms are then ready for the release agent.

 

MAINTENANCE

Storage:

  • Rust-O-Magic Rust Preventative will keep indefinitely in sealed containers.
  • It must be stirred between each use.

Coverages:

  • On smooth, non-porous surfaces – 500 sq. Ft./Gal.
  • On semi-porous surfaces  – 300 Sq. Ft./Gal.

Precautions:

Keep out of reach of children. Do not take internally. Do not use near fire or open flame. Use with adequate ventilation and avoid prolonged contact with skin.

 

PRODUCT DESCRIPTION

Composition:

Rust-O-Guard Rust Preventative is a paraffin-like material in a hydrocarbon carrier.

Basic Use:

Rust-O-Guard is a rust-preventative material that is applied to steel forms to prevent the formation of rust and corrosion on forms in storage, either outside or inside. It also waterproofs wood forms in storage. Protection time is 6 to 8 months.

 

AVAILABILITY AND COST

Availability:

Rust-O-Guard Rust Preventative is available in 55, 5, and 1 gallon containers.

Cost:

Material costs can be obtained by contacting The Hill and Griffith Company through our contact form.


TECHNICAL SERVICES

Technical Services can also be obtained by contacting The Hill and Griffith Company through our contact form.

 

Contact us for product information or request bulletins and technical papers.

Download a PDF version of this page.

Concrete Casting News

Water Based Concrete Form Release

Water Based Concrete Form Release

Grifcote® water based concrete form release agent product lines, are non-petroleum, readily and inherently biodegradable. Readily biodegradable concrete form...
Read More

Precast Concrete Panel Construction Best Practices Video - Illustrating release agent application

Precast Concrete Panel Construction Best Practices Video - Illustrating release agent application

Best practices in precast concrete construction is illustrated in this video from Wilco Precast, Papkura, Auckland. The Concrete Construction Association of...
Read More

Precast Concrete Advancements - Pavement - Technology

Precast Concrete Advancements - Pavement - Technology

Bill Palmer, the editor of CONCRETE CONSTRUCTION Magazine, shares precast concrete advancements from his presentation in Brazil, "What's new in North America."...
Read More

Concrete Casting News

Water Based Concrete Form Release

Water Based Concrete Form Release

Grifcote® water based concrete form release agent product lines, are non-petroleum, readily and inherently biodegradable. Readily biodegradable concrete form...
Read More

Concrete form release products and concrete casting supplies from Cast-O-Magic are now available through Hill and Griffith

The Hill and Griffith Company recently acquired the Cast-O-Magic Concrete Form Release Agent product lines from Rostine Manufacturing & Supply, Inc., of Springfield, Mo. The purchase contributes to Hill and Griffith's market share growth and strongly fits within our core product range. Please contact our sales service department at 513-921-1075 or orders@hillandgriffith.com for more information.

Request SDS

Safety Data Sheets for Metal Casting Supplies, Die Casting Supplies, Metalworking Supplies, Concrete Casting Supplies

Show Schedule & Specials

 

NPCA Precast Concrete Show

The Precast Show
February 22-24, 2018
Denver, CO
Booth #1527
More Information »

 

Technical Articles

Our Sister Companies

HG Logistics LLC

New logistics services from Hill and Griffith

HG Logistics LLC provides logistics management services for the U.S., Canada and Mexico.
Read More »

Griflube Hydraulic Fluids in Metalworking Supplies and Metal working Products

Griflube Hydraulic Fluids

Environmentally Clean, High Pressure, High Temperature.
Read More»

Murphy Air Sprayers - Spray Guns in our Green Sand Supplies, Die Casting Supplies, Metalworking Supplies and Concrete Casting Supplies

New Murphy Sprayer for coating and washing

Rugged design assures dependable coverage and maximum efficiency.
Read More »