GRIFCOTE® Premium Dissolver is a proprietary blend of materials that promote the removal of hardened concrete.
The reaction of GRIFCOTE® Premium Concrete Dissolver with the previously deposited concrete on the surface of a metallic surface will facilitate the removal of this material.
(Video and photos show the construction stages of hollow precast wall production in the Tachydomi SA factory. Learn more.)
The recommended method for the application of the GRIFCOTE® Premium Dissolver is by utilizing a hard bristle brush, mechanical sprayer or any other compatible spray method which applies a fine mist or spray covering all of the areas that require treatment.
For optimum performance of GRIFCOTE® Premium Dissolver saturate the area of the hardened concrete and allow GRIFCOTE® Premium Dissolver to penetrate the surface for 10 to 20 minutes. After the GRIFCOTE® Premium Dissolver contacts the hardened concrete the surface will turn white and then darken. Re-treat the surface if a white residue appears on the area where the concrete remains. Re-apply surface until concrete has turned to a softened material (mush). On areas of the metal surface where a thick buildup is observed, repeat the application of the GRIFCOTE® Premium Dissolver and repeat the cleaning process until the concrete on the metal surface has softened and turned to “mush”.
**Application rate will vary depending on metal surface and application methods.
|Weight per Gallon||8.1 lbs/gal|
|Flash Point||N/A (P.M.C.C.)|
|Viscosity||>1 @ 40° C|
A Material Safety Data Sheet should be reviewed for safety precautions prior to application.
(Hollow precast concrete wall production showing cured side being set on wet side. Image from Tachydomi Sa video.)
(Hollow precast concrete wall production showing finished wall being placed in storage. Image from Tachydomi Sa video.)
Hill and Griffith Customer Service
We're known for our hands on approach. Let us visit your plant and recommend concrete release agents, packerhead concrete form releases, concrete form seasoning, potable water concrete form release, non-petroleum concrete form release, biodegradable concrete form release, rust inhibitors and concrete dissolver products that suit your needs.
We are pleased to provide samples in quantities large enough to allow you to "try before you buy."
Contact Us »
Technical Services & Support
On-site casting defect investigations, product testing, machine start-ups and much more. Also, lab facilities are available to provide testing upon request.
Contact Us »