<img alt="" src="https://secure.hims1nice.com/150891.png" style="display:none;">

Concrete Casting News from the Hill and Griffith Company

Saving Time & Money With Precast Concrete Buildings

Posted by Hill and Griffith Company on Dec 31, 2020 10:47:10 AM

Excerpt from Water & Wastes Digest's March 2017 Article

Texas utility selects precast option for buildings to house pumping equipment

When the timeframe for its project was too short for traditional construction methods to meet, the San Jacinto River Authority (SJRA) turned to a precast concrete building solution for its pump station installation in Baytown, Texas.

The new transfer pump station was needed because the Chevron-constructed facility in Baytown required more water for its operations. The new station has to pull 16.5 mgd from the Coastal Water Authority canal and pump it into the SJRA canal.  

Easi-Set CS Baytown TX 1

The Solution

The original specification was for a large concrete masonry unit (CMU) building. Houston contractor Boyer Inc. was the low bidder on the project, but its bid was still over budget. Through SJRA-initiated value engineering, Boyer offered a precast concrete building manufacturer as an alternative after determining a CMU could not be constructed in time or on budget.

Nathan Davis, a project manager for Boyer, says the building was an easy aspect to quantify.

"There were not only savings on the front end for cost of the structure, but there were savings on the back end with the reduced time from pouring the slab to setting the roof panels that allowed Boyer to reduce overall construction time, labor and equipment costs for the project," he said.

The buildings utilize clear-span precast concrete roof sections from 20 ft to 50 ft in width. Each 10-ft-deep roof section is post-tensioned to adjoining sections, allowing for buildings of virtually unlimited length to be manufactured.

Easi-Set CS Baytown TX 2

Two Easi-Span buildings – 40 ft by 40 ft by 16 ft and 30 ft by 60 ft by 20 ft – were needed to house all the pump station equipment. The buildings were manufactured and installed by Lonestar Prestress Manufacturing Inc. of Houston. Lonestar, a licensed producer for Easi-Set Buildings, works directly with customers to meet individual needs and ensure quality standards are met.

"Boyer was able to propose the use of the precast concrete buildings as a value engineering solution because it has worked with SJRA in the past and knew the building owner's project goals," said Leo Rowe, sales manager for Lonestar. "We were able to add our experience and expertise to Boyer's ingenuity to meet the project schedule and budget."

Read More

Hill and Griffith Customer Service

We're known for our hands on approach. Let us visit your plant and recommend concrete release agents, packerhead concrete form releases, concrete form seasoning, potable water concrete form release, non-petroleum concrete form release, biodegradable concrete form release, rust inhibitors and concrete dissolver products that suit your needs.

Hill and Griffith Samples

Product Samples

We are pleased to provide samples in quantities large enough to allow you to "try before you buy."
Contact Us »


Hill and Griffith Customer Service

Technical Services & Support

On-site casting defect investigations, product testing, machine start-ups and much more. Also, lab facilities are available to provide testing upon request.
Contact Us »


 Bulletins and Technical Papers for Concrete Casting Products

Tags: Concrete, Casting Solutions, Concrete Casting Products, Concrete Casting Supplies, Concrete Casting, Precast Concrete, Concrete Form Release Agent, Water & Wastes Digest

Subscribe to Concrete News

Concrete Posts

Concrete Casting News Categories

see all