Regular reviews and benchmarks are important for successful die casting process evaluations
Hill and Griffith offers this helpful Die Casting Process Evaluation Form to submit your input.Our sales representatives will respond with suggestions for further on-site process surveys, casting defect investigations, product testing, tooling start-up programs, statistical process controls and much more. Also, lab facilities are available to provide testing upon request.
(A video by Flow Science, "Published on Aug 19, 2015, An HPDC simulation where fast shot is automatically triggered when the fluid reaches the gates. The triggering process is automated through the new Active Simulation Control feature that will be released in FLOW-3D v11.1 and FLOW-3D Cast v4.1.")
Here are the text fields of the Hill and Griffith Company Die Casting Process Evaluation Form.
__________________________________
Part Name
__________________________________
Finished Required (Paint or Plating)
__________________________________
Casting Alloy
Casting Alloy
__________________________________
Alloy Temperature in Holding Furnace
Alloy Temperature in Holding Furnace
__________________________________
Weight of Casting
__________________________________
Manufacturer of the Machine
Manufacturer of the Machine
__________________________________
Tonnage
__________________________________
Die Alloy
Die Alloy
__________________________________
Cavity: Single or Multiple
Cavity: Single or Multiple
__________________________________
Die Temperature After Spray (Low)
Die Temperature After Spray (Low)
__________________________________
Die Temperature Before Spray (High)
Die Temperature Before Spray (High)
__________________________________
Is Die Internally Cooled? If so, Water or Oil?
Is Die Internally Cooled? If so, Water or Oil?
__________________________________
Tip Size
Tip Size
__________________________________
Cycle Time
Cycle Time
__________________________________
Fill Time
Fill Time
__________________________________
Intensification Rise Time
Intensification Rise Time
__________________________________
Intensification Pressure
Intensification Pressure
__________________________________
Length of Intensification Time
Length of Intensification Time
__________________________________
Die Lubricant Manufacturer
Die Lubricant Manufacturer
__________________________________
Percent Solids in Die Lubricant Concentrate
Percent Solids in Die Lubricant Concentrate
__________________________________
Die Lubricant Ratio
Die Lubricant Ratio
__________________________________
Spray Time
Spray Time
__________________________________
Spray Volume
Spray Volume
__________________________________
Spray Pressure
Spray Pressure
__________________________________
Other Observations or Comments
Other Observations or Comments
