Controlling the temperature of a die casting die through the location of cooling lines is critical to performance and die life.
A properly designed system of water and/or oil lines will process heat energy so the die can be operated productively with the highest part quality possible. NADCA has created a three level approach to addressing thermal control. This series is broken down by beginner, intermediate and advanced courses suitable for people with varying levels of knowledge in this area.
Part 1: Simplified Approach to Designing Cooling of Dies – Many people believe that it is very difficult to design the cooling for a die and instead use experience. This first course shows that a good estimate can be made with minimal math. It goes through the way this was developed and then gives examples of designing the cooling for some castings. This is a rapid and reasonably accurate approach for die casters and tool designers with minimal time.
Date: June 28, 2017
Part 2: Intermediate Approach to Designing Cooling of Dies – This will look at where the Simplified Approach formulae came from. It will take a more mathematical approach to the problem and include more variables, such as metal temperature. This will also look at more complex parts and work out how you calculate the cooling for castings with complex cores.
Date: June 29, 2017
Part 3: Advanced Approach to Designing Cooling of Dies – In this course there are more advanced details on cooling. Namely:
-Transient effects due to Thermal Diffusivity
-Cooling of runners and biscuit to reduce shrinkage effects
-How a fountain/bubbler works
-The use of jet cooling and why it works, plus strengths and weaknesses
-Oil cooling/heating of dies
-Combining oil and water in one die and why we would do this
-Changing the heat transfer within a die
Date: July 5, 2017
Part 4: Die Spray and Bringing it all Together – This final webinar covers the approach to die spray and how to bring that into the design. It then gives an example where all the facets of the die are brought together as a demonstration. It will give an example that covers general cooling, specific or spot cooling, oil heating, jet cooling and die spray.
Date: July 11, 2017
Purchase a single webinar
Part 1: Simplified Approach to Designing Cooling of Dies
Part 2: Intermediate Approach to Designing Cooling of Dies
Part 3: Advanced Approach to Designing Cooling of Dies
Part 4: Die Spray and Bringing it all Together
Purchase access to the remaining parts of this webinar series
Thermal Control of Dies Webinar Series
These webinars will take place at 3pm CDT on the dates listed. The cost per webinar is $69 for Corporate Members, $99 for Individual Members or $119 for Non-Corporate Members. Please note that registering for a webinar grants you access to the live broadcast on the given date. No recordings or pdfs of the presentation will be issued.
If you are not interested in attending these thermal control of die casting webinars but know someone who might benefit from it, please pass this information along to them.
Click Here for Additional Upcoming Webinars
Hill and Griffith Customer Service
We're known for our hands on approach. Let us visit your plant and recommend release agents, lubricants, plunger lubricants and permanent mold lubricants that suit your needs. Products that represent the latest in technology and ongoing research that enhance competitiveness and increase productivity.
We are pleased to provide samples in quantities large enough to allow you to "try before you buy." Die Casting and Squeeze Lubricants- Diluco®, Permanent Mold Coatings- Concote™, Plunger Lube™- Graphite and non-graphite oils and pastes with excellent anti-wear properties, Casting Operations Products: Start-up lubes, Ladle coatings, Anti-soldering pastes, Water glycol, Trim press lubricants, Surface protection for casting storage, Corrosion protection for die storage, Cleaners for machines and dies, Corrosion protection for machines, Heat treatment quenchants, and Heat-transfer fluids. Also, Industrial Lubricants Griflube®, Hydraulic fluids with fire-resistant and anti-wear properties, Bio-Syn natural ester-based hydraulic fluid, Way oil knuckle lubes and Metalworking Fluids- Grifcut™
Technical Services & Support
On-site process surveys, Casting defect investigations, Product testing, Tooling start-ups and Statistical process controls and much more. Also, lab facilities are available to provide testing upon request.