Progress Casting's dry-ice blasting operation cuts cleaning time by 86% and saves operating costs.
Excerpt from the October 2019 Foundry Management & Technology article
Metalcasters' product quality and performance results are under constant review, and new technologies and techniques are always being tested, or considered. But how often are maintenance methods reconsidered? Progress Casting Group in Plymouth, MN, produces precision die castings and sand castings it supplies to automotive, aerospace, and defense industry customers. It had a fairly standard problem — cleaning core boxes and low-pressure die casting molds — and a fairly standard approach to addressing it.
Core boxes and casting molds are meant to be used over and over again. So, they must be cleaned frequently and effectively in order to maintain dimensional accuracy and process reliability. The refractory coatings (i.e., release agent) and resin spray buildup on the mold faces, as well as sand and binder residue on the core boxes, had been removed by sand blasting and manual brushes. Both processes are slow and not fully effective. Sand blasting degrades the urethane on the molds and both methods routinely destroy the vents on the core boxes. More than this, the cleaning can damage machinery and workers' safety may be at risk in the process.
Progress Casting Group was looking for a cleaning method that would remove the refractory coatings and other residual material without damaging mold vents. In addition, uneven refractory coating should be avoided as it may affect the quality of finished products and the speed of production. Release agents and residual materials also should be removed to leave the mold surfaces smooth without rounding corners or introducing other shape changes—all important for finished product quality.
The area around the tool should be clean so that it is safe for the workers. Tools must be cleaned quickly and effectively after every use to minimize the downtime. The molds should also retain the working temperature for best reapplication the refractory coating.
The problem with steel shot, glass bead, and sandblasting is the possible mold vent damage and urethane damage on molds. Rounding of mold edges leads to flash on the parts, shortens mold life, and creates secondary waste. There also is potential injury from atmospheric contaminants.
Manual cleaning with chemicals and brushes is labor intensive and potentially harmful to the workers, requires long downtime, and it's ineffective for some cleaning tasks.
An alternative cleaning method is a patented shaved dry-ice technology: small, dry-ice MicroParticles clean surfaces faster than standard 3-mm blasting pellets in a quieter process that leaves a smoother surface.
Dry-ice blast cleaning is similar in concept to sand or soda blasting, in which the media is accelerated through a pressurized airstream. The primary difference is that the blasting media is recycled CO2 — the dry-ice MicroParticles — not sand or soda. The particles are accelerated at supersonic speeds through a specialized hose and nozzle. On contacting the mold surface, the combination of kinetic energy and thermal gradient effects of the dry-ice blast breaks the bond between the surface and the residue. Upon impact with the tool surface, the CO2 sublimates, returning to its natural gas form, leaving no secondary waste to clean up.
More News From Foundry Management & Technology
Hill and Griffith Customer Service
The Hill and Griffith Company's green sand metal casting foundry supplies help achieve the EPA's M.A.C.T. standards and reduce Benzene emissions. Our variety of environmentally sound release agents, coatings, partings, lubricants, core oils and specialty products will help you meet your metal casting's needs. We're known for our hands-on approach. Let us visit your plant and recommend products that suit your needs.
We are pleased to provide samples in quantities large enough to allow you to "try before you buy."
Contact Us »
Technical Services & Support
On-site casting defect investigations, product testing, machine start-ups and much more. Also, lab facilities are available to provide testing upon request.
Contact Us »