Hill & Griffith has developed and patented a unique water-based liquid parting which provides improved odor characteristics and reduced flammability for foundry molding applications. Flammability has long been a concern in automatic molding operations and with the water-based formula, this concern can be minimized or eliminated.
Another important water-based benefit is the inherent low odor level, which makes this product more acceptable to operating personnel. In addition to the low odor levels, AQUA PART® II minimizes airborne hydrocarbon emissions in the workplace enhancing the usability of this product.
The uniqueness of AQUA PART® II formula provides a durable film when applied on the patterns resulting in fewer sprays per draw with clean releases and minimum build-up.
For improved performance and cost reduction, it is recommended that AQUA PART® II be applied with air-activated nozzles. Tests have shown that using this type equipment provides continuous uniform spray patterns resulting in improved coverage and reduced usage.
|STATE @ 25o C||Free-flowing liquid|
|ODOR||Pleasant smelling; low odor level|
|FREEZE/THAW||If frozen, product returns to original consistency with strong agitation|
Hill and Griffith Customer Service
We're known for our hands on approach. Let us visit your plant and recommend products that suit your needs.
We are pleased to provide metal casting supply samples in quantities large enough to allow you to "try before you buy."
Contact Us »
Technical Services & Support
On-site casting defect investigations, product testing, machine start-ups and much more. Also, lab facilities are available to provide testing upon request.
Contact Us »