Permanent Mold Coating for Diecasting Foundry
CONCOTE™ R200 is a dilutable permanent mold coating formulated with special refractories, binders, wetting agents, and preservatives. When dried CONCOTE™ R200 provides a thin continuous film between the surface of the die and the casting. CONCOTE™ R200 is an outstanding insulating and high surface finish coating for aluminum alloys.
- Smooth Surface Finish
- Prevents Premature Die Failure
- Anti-Weld Properties
- Good Lubrication
- Easily Applied
- Good Release Properties
Typical Product Data*
Density (Lbs./Gal.): 12.9
Refractories: Talc, Titanium Dioxide
*These values are not intended for use in preparing specifications.
CONCOTE™ R200 is supplied in concentrated form and can be diluted to any desired concentration depending on the application with water. Generally, the dilution starting pointing (Water to Coating by weight):
Top Coat 2:1
Base Coat 1:1
Single Coat 2:1
CONCOTE™ R200 is a medium insulating coating providing extremely smooth surface finish for aluminum alloys; specifically designed for use in aluminum wheel manufactures. CONCOTE™ R200 can also be used as a one coat product providing sufficient insulation with good releasing properties. Any permanent mold coating should be mixed well before use and avoid freezing.