GRIFCOTE® Premium Dissolver is a proprietary blend of materials that promote the removal of hardened concrete. The reaction of GRIFCOTE® Premium Dissolver with the previously deposited concrete on the surface of a metallic surface will facilitate the removal of this material.
The recommended method for the application of the GRIFCOTE® Premium Dissolver is by utilizing a hard bristle brush, mechanical sprayer or any other compatible spray method which applies a fine mist or spray covering all of the areas that require treatment.
For optimum performance of GRIFCOTE® Premium Dissolver saturate the area of the hardened concrete and allow GRIFCOTE® Premium Dissolver to penetrate the surface for 10 to 20 minutes. After the GRIFCOTE® Premium Dissolver contacts the hardened concrete the surface will turn white and then darken. Re-treat the surface if a white residue appears on the area where the concrete remains. Re-apply surface until concrete has turned to a softened material (mush). On areas of the metal surface where a thick buildup is observed, repeat the application of the GRIFCOTE® Premium Dissolver and repeat the cleaning process until the concrete on the metal surface has softened and turned to “mush”.
**Application rate will vary depending on metal surface and application methods.
|Weight per Gallon||8.1 lbs/gal|
|Flash Point||N/A (P.M.C.C.)|
|Viscosity||>1 @ 40° C|
A Material Safety Data Sheet should be reviewed for safety precautions prior to application.
Download a Word .doc version of this page.