Excerpt from the March 2017 issue of International Journal of Engineering Research and Application by Vaibhav Ingle and Madhukar Sorte I....

NADCA offers its book outlining the causes of die casting defects and how to prevent them This is a comprehensive textbook for die...

NADCA EC-515 Die Casting Defects Course Review, Basics for controlling die casting defects - By Dr. Steve Midson The die temperature’s...

Some highlights from NADCA’s online webinar – Defects in Die Casting: Surface Defects and Other Problems. This second course covers...

Die casting is a high precision, rapid parts-production process involving the high pressure injection of molten metal into a die having a...

By Dr. D. Benny Karunakar, Department of Mechanical and Industrial Engineering, National Programme on Technology Enhanced Learning, India...

By Tim Cowell, Hill and Griffith Company, Technical Director Shrink Porosity (Temperature) Note that the temperatures that affect the...

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity (Lubricant) The lubricant used on the dies or on the plunger...

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity (Runners) The next location of trapped air is likely to be in...

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity Porosity is the biggest problem in die casting. There are two...

NADCA Video News Update: Engineering Die Casting Dies: Dimensional Repeatability The material presented in this video are some highlights...

NADCA EC-515 Die Casting Defects Course Review, Basics for controlling die casting defects - By Dr. Steve Midson Soldering phenomenon...

NADCA EC-515 Die Casting Defects Course Review, Basics for controlling die casting defects - By Dr. Steve Midson Reduce Die Casting...

NADCA EC-515 Die Casting Defects Course Review, Basics for controlling die casting defects - By Dr. Steve Midson Blisters are another...

NADCA EC-515 Die Casting Defects Course Review, Basics for controlling die casting defects - By Dr. Steve Midson Gas porosity is the...

Basics for controlling die casting defects - By Dr. Steve Midson The scrap report should be available to everyone in the plant. In fact,...

NADCA Video News Update: Die Casting Defects - Surface Defects Part I There is not one single person that is responsible for die casting...

Today's video comes from KenWalt Die Casting. It highlights their unique vacuum assist die casting process for large zinc and aluminum...

Controlling the temperature of a die casting die through the location of cooling lines is critical to performance and die life. A...

Some basic features are common for all kind of release agents (R.A.). They are: Incompatibilty with the product to be demoulded both...