<img alt="" src="https://secure.hims1nice.com/150891.png" style="display:none;">

Cobra™ 521 Release Agent

Green Sand Metalcasting Foundry ImageRelease Agent for Green Sand Metalcasting Foundry

COBRA™ 521 is a ready to use non-flammable release agent that can be used in a wide variety of core making operations. Manufactured with high quality ingredients, COBRA™ 521 provides excellent lubrication and release with minimal build up on the tooling. Practical areas of use include all cold box processes and no bake chemical processes.

Features

  • Wide Variety of Applications
  • No Montreal Protocol Regulations
  • Excellent Release
  • Zero Volatile Organic Compounds
  • Cost Effective

Typical Product Data

(These values are not intended for use in preparing specifications)

Flash Point (C.O.C.)  Greater than 200°F
Viscosity  Approximately 100 CPS @ 68°F
Freeze Point  Will not freeze
Density (lbs./gal.) 7.9

Use Recommendations

COBRA™ 521 has seen usage and success in the areas of core & mold making using chemical resin systems. The release will be affected by usage rates and intricacy of the core produced. Generally, the release agent can be applied using conventional spraying equipment such as an airless sprayer, a pressurized canister type sprayer or a molders siphon sprayer. In the latter instance it may be necessary to reduce the airflow in the inlet orifice of the container.

Since COBRA™ 521 is a non-flammable organic material, proper care should be taken when handling and applying this product.

Open Printable Document (Word .doc) Here

Green Sand Foundry News

5 Steps to Identify Green Sand Metalcasting Defects

5 Steps to Identify Green Sand Metalcasting Defects

The procedure of identifying, diagnosing and minimizing or eliminating crucial casting defects is important for a foundry to run in a low-cost, and...
Read More

Foundry Leadership Conference Insights, Guest Post by Doug Kurkul, AFS CEO

Foundry Leadership Conference Insights, Guest Post by Doug Kurkul, AFS CEO

Metalcasters around the world face many of the same challenges. That point was articulated at the recent Foundry Leadership Conference in Amelia Island,...
Read More

The Metal Casting Foundry Holiday Gift Giving Season is Right Around The Corner

The Metal Casting Foundry Holiday Gift Giving Season is Right Around The Corner

Here are the top ten metal casting books available in the American Foundry Society (AFS) bookstore The AFS has compiled a list of the top 10 books purchased in...
Read More

Green Sand Foundry News

5 Steps to Identify Green Sand Metalcasting Defects

5 Steps to Identify Green Sand Metalcasting Defects

The procedure of identifying, diagnosing and minimizing or eliminating crucial casting defects is important for a foundry to run in a low-cost, and...
Read More

Request SDS

Safety Data Sheets for Metal Casting Supplies, Die Casting Supplies, Metalworking Supplies, Concrete Casting Supplies

Show Schedule

CastExpo 2019
April 27-30, 2019
Atlanta, GA
More Information »

Aquapart Parting Compound for Green Sand Metalcasting

Aquapart® II - Water Based Parting Agent

Use Less Seacoal and Still Get Super Clean Castings
Read More »

Bulletins and Technical Papers for Metal Casting Products

Technical Articles

Our Sister Companies

HG Logistics LLC

New logistics services from Hill and Griffith

HG Logistics LLC provides logistics management services for the U.S., Canada and Mexico.
Read More »

Griflube Hydraulic Fluids

Griflube Hydraulic Fluids

Environmentally Clean, High Pressure, High Temperature.
Read More»

Murphy Air Sprayers for casting applications

New Murphy Sprayer for coating and washing

Rugged design assures dependable coverage and maximum efficiency.
Read More »

Posts by Tag