top of page

<< Return to Core Room Home

CORE MUDS & ADHESIVES

CORE ROOM

ADHESIVES

GREEN HORNET

Core paste formulated with organic and inorganic binders, fillers, suspension agents and water.

  • Good strengths

  • Easy application

  • Easy clean up

  • Excellent stability

  • Low cost

Type: Water based

​

Binder: Silicate

​

VOCs: No

​

Packaging: Quarts, Pails, Drums

RED CHIEF

Core paste formulated to suit a variety of foundry applications

  • Use with fine, medium or coarse sands

  • Low gas content minimizes metal agitation at pasted joints

  • Rapid drying - suitable for pasting warm cores

  • Available in a dry powder

Type: Water based

​

Pasting Applications: All metals, can be applied to raw sand, oil sand, no bake, and shell mold operations

​

SHURSTIK 306

Proprietary blend of solvents, fillers, adhesives and suspension agents.

  • Excellent strength

  • Excellent stability in container

  • Good visibility

  • Fast drying

Setting: Fast

​

Appearance: Red heavy liquid

​

Packaging: Quarts

SPEEDSEAL 10

Mold seal-core paste formulated with organic and inorganic binders, fillers, suspension agents and water.

  • Good strength

  • Water based

  • Bead forming

  • Easy application

  • Easy clean up

Non-Volatile Matter: 61

​

Binder: Silicate

​

Appearance: Gray

MUDS

EBONY CLASSIC

Fortified with refractory graphite for large section casting work

  • Flows smoothly under light pressure

  • Contains minimum gas content, protects against core blows

  • Eliminates surface defects

  • Easy clean up

Application:  Thin applications will air dry rapidly.  Heavier applications should be re-dried in the core oven to remove contained water.

​

Works well on iron and all non-ferrous alloys.

P-20-A

Formulated with red iron oxide for popular use in non-ferrous foundries

  • Flows smoothly under light pressure

  • Contains minimum gas content, protects against core blows

  • Eliminates surface defects

  • Easy clean up

Application:  Thin applications will air dry rapidly.  Heavier applications should be re-dried in the core oven to remove contained water.

​

Works well on steel, iron and all non-ferrous alloys.

bottom of page