CLEANERS
AUXILIARY PRODUCTS
EXTERMINATOR 2000
Highly active bactericide / bacteriostatic and fungistat to combat bacteria, fungus and mold.
-
Used to maintain clean die lubricant spray system
-
Complete 1-2x/year
Appearance: Light amber
Application: Combat bacteria, fungus and mold
pH: 10.5
Packaging: Totes
HYDROCLEAN 318
Solvent free cleaner
-
Contains surfactants and dispersants
-
Safe with all ferrous and non-ferrous metals
Appearance: Amber
Application: Used in floor scrubbing machines, hand mopping, or for other floor and machine cleaning applications.
pH: 9.2 - 9.6
Packaging: Totes, Pails
HYDROCLEAN
FC-305
Concentrated alkaline cleaning compound
-
Effective removing oil and solid soils from variety of surfaces
Appearance: Clear green liquid
Application: Used in floor scrubbing machines, hand mopping, or other floor and machine cleaning applications
pH (@2%): 9.4
Packaging: Totes, Drums, Pails
SOLVTECH D-15
State-of-the-art mold and die cleaner
-
Ready-to-use blend of cleaners breaks down emulsions of petroleum oils, silicone, polymers and hydro-treated waxes and oils
-
Reduces clean up and repair for die
Appearance: Amber
Application: Spray generously on soiled die mold, let stand for 15-20 minutes and wash with high pressure hose.
Water Solubility: Non-dispersible
Packaging: Totes, Drums, Pails
SOLVTECH D-28
Solvent free cleaner that contains emulsifiers, dispersants and rust inhibitors
-
Safe with all ferrous and non-ferrous metals
-
Removes die lubricant buildup
-
Operator friendly
Appearance: Yellow
Application: 30% concentration typically recommended. This product is compatible with common seals up to 100% maximum concentration.
pH (5%): 9.2 - 9.6
OXANE AC-15
Heavy duty industrial descaler
-
Used to remove hard water deposits from heat exchangers and chillers
-
Can use fraction of the amount compared to other descalers
Appearance: Orange
Application: Can be reduced and diluted with water to the desired concentration. After cleaning process is complete, affected surfaces should be rinsed.
GRIFCUT S-77
Water displacing spray
-
Formulated with non-volatile oils
-
Suitable for metal to metal applications
-
Cleans and protects against rust corrosion
-
Drives out moisture
Compares with WD40 to stop squeaks, protects metal, frees sticky mechanisms and removes adehsives.
Packaging: Drums, Pails, 1 Gal Jug