Slag Kleen Molten Metal Coagulant

Large Metal Foundry and Die Casting

Molten Metal Coagulant for Diecasting Foundry Applications

Description

Hill and Griffith’s Slag Kleen is a perlite material used as a slag coagulant in a molten metal application. Slag Kleen is typically used with Iron, Brass and Bronze metals.

Perlite is a generic term for a naturally occurring siliceous volcanic rock. The distinguishing feature of perlite is that when it is heated to its softening range, it expands 4 to 20 times its original volume. This expansion is due to a small amount of water contained in the crude perlite rock. As the ore heats, the water vaporizes and pops allowing the expansion. Any slag present on the molten metal will adhere to the expanded perlite and continue to float. The combined slag/perlite can then be removed from the molten metal in large pieces, resulting in clean molten metal for the casting process.

Typical Product Properties

Elemental Analyses: (typical)

Silicon 33.8
Aluminum 7.2
Potassium 3.5
Sodium 3.4
Iron 0.6
Calcium 0.6
Magnesium 0.2
Trace Elements 0.2

Particle Size Distribution: (typical)

Plus 8 screen 34%
Plus 12 screen 40%
Plus 16 screen 20%
Plus 20 screen 4%
Beyond Plus 20 screen 2%

Appearance:

From transparent light gray to glossy black

Application

Slag Kleen should be generously distributed on top of a full ladle of molten metal. Once the perlite has expanded, a color change will occur as the Slag Kleen will turn to a white color. At this point, the material and slag should be removed from the metal.

Slag Kleen can be used on a full ladle or added during the ladle filling process.

If an insulating cover is desired, Slag Kleen should be applied to the ladle or furnace at a thickness of at least 3 inches.

Caution

Slag Kleen is a material that has the potential to absorb water. This is a safety concern in that if applied to molten metal, excess steam could be generated. Slag Kleen should be stored in a dry environment.

 

Download Printable Document (MS Word .doc) by Clicking Here

Die Casting News

The Importance of Lubricants in Die Casting, guest blog by Premier Die Casting Company

The Importance of Lubricants in Die Casting, guest blog by Premier Die Casting Company

It’s impossible to do effective die casting without proper lubricants. What are the proper lubricants for die casting and what are the different die casting...
Read More

"Intro to Causes of Die Casting Porosity" - NADCA Highlight (proper die spray application)

"Intro to Causes of Die Casting Porosity" - NADCA Highlight (proper die spray application)

The material presented in this video are some highlights from NADCA’s online webinar - Porosity Basics: Introduction to the Causes of Porosity. To successfully...
Read More

"Manage Your Die Casting

"Manage Your Die Casting's Porosity" - (proper die spray application)

Join NADCA's Porosity Management Webinar Series From the North American Die Casting Association (NADCA) web page.
Read More

Request SDS

Safety Data Sheets for Metal Casting Supplies, Die Casting Supplies, Metalworking Supplies, Concrete Casting Supplies

Technical Articles

Show Schedule & Specials

 

CastExpo 2019
April 27-30, 2019
Atlanta, GA
More Information »

 

Diecasting Congress 2018

Die Casting Congress & Tabletop
October 15-17, 2018 
Indianapolis, IN
Booth# TBA
More Information »

Aquapart Parting Compound for Metal Diecasting

Aquapart® II - Water Based Parting Agent

Use Less Seacoal and Still Get Super Clean Castings
Read More »

Bulletins and Technical Papers for Die Casting Products

Our Sister Companies

HG Logistics LLC

New logistics services from Hill and Griffith

HG Logistics LLC provides logistics management services for the U.S., Canada and Mexico.
Read More »

Griflube Hydraulic Fluids for Metal Diecasting

Griflube Hydraulic Fluids

Environmentally Clean, High Pressure, High Temperature.
Read More»

Murphy Air Sprayers for metal diecasting applications

New Murphy Sprayer for coating and washing

Rugged design assures dependable coverage and maximum efficiency.
Read More »