for Diecasting Foundry
Formulated with refined oils, natural and synthetic waxes, vegetable oils, wetting agents and emulsifying agents, they are easily diluted with water and present no known fire hazard. Diluco® 100 products may be compatible with solid particle lubricants and additive packages if conditions of use warrant their needs.
Features:
- Fast, Easy Release
- Excellent Thermal Stability
- Essentially Non Volatile
- Good Lubricity
- Provides Good Fill
- Easily Applied
Typical Product Data:
120 | 132 | 135 | |
Non-Volatile Matter | 32% | 30% | 22% |
Active Content | 24% | 25% | 18% |
Graphite Content | 0.0% | 1.0% | 0.0% |
Emulsifier Type | Anionic, Nonionic | ||
Color | Translucent to Pale Yellow | ||
Dilution Stability | No Visible separation after one month at .55% solids in 342 ppm hard water. | ||
Freeze/Thaw Stability | 4 Cycles (min.) | ||
Storage Stability | 1 year | ||
Diluent | Water |
Application:
Diluco® 100 products are general-purpose mold release agents for aluminum and zinc metal parts that are to be painted, metallized, or bonded. Dilute with water to a working concentration of .55 to 2.2% solids ( 40 to 80:1). Diluco® 100 products can be applied by any conventional method, although spraying is usually the preferred method.
Contact us for product information or request bulletins and technical papers.