Diluco® 310 Die Casting Release Agent

Products of our Die Casting Lubricants and Diecasting Release AgentsUnique Clean and Consistent Die Casting Release Agent for Diecasting Foundry

DILUCO™ 310 is a specially formulated lubricant used in the squeeze casting process. Manufactured with high purity raw materials that include minerals, natural and synthetic waxes, wetting agents and dispersing agents combined in a water extendable system.

Features

  • Excellent Thermal Stability
  • Easy Release
  • Easily Applied
  • No Finishing Problems
  • Good Surface Finish

Typical Product Data*

Non-volatile matter, % 25
Color: Tan
Storage stability: 1 year in original container
Diluent: Water
Density, lbs/gal: 9.5


*These are typical properties and should not be used as control specifications.

Use and Handling

DILUCO™ 310 has proven to perform the best at dilution ratios between 10:1 and 16:1 (water to concentrate). Agitation is recommended before transferring to a central system or mixing container as well as after dilution between applications. Build up on the die may be experienced during use and can be cleaned using a variety of cleaning procedures. The build up is not "varnish" like and can be scraped off using tools and water spray.

Storage of DILUCO™ 310 should be at room temperature and freezing avoided. The Material Safety Data Sheet should be consulted before use and all safety precautions followed. 

Contact us for product information or request bulletins and technical papers.

Download a PDF version of this page.

Die Casting News

Die Casting Porosity Causes and Solutions - Part 3

Die Casting Porosity Causes and Solutions - Part 3

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity (Lubricant) The lubricant used on the dies or on the plunger can generate gas when...
Read More

Die Casting Porosity Causes and Solutions - Part 2

Die Casting Porosity Causes and Solutions - Part 2

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity (Runners) The next location of trapped air is likely to be in the runners. Any sharp...
Read More

Die Casting Porosity Causes and Solutions - Part 1

Die Casting Porosity Causes and Solutions - Part 1

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity Porosity is the biggest problem in die casting. There are two basic types of porosity...
Read More

Request SDS

Safety Data Sheets for Metal Casting Supplies, Die Casting Supplies, Metalworking Supplies, Concrete Casting Supplies

Technical Articles

Show Schedule & Specials

 

diecasting-congress-2017

Die Casting Congress & Tabletop
September 18-20, 2017
Atlanta, GA
Booth #225
More Information »

 

Diecasting Congress

122nd Metalcasting Congress
April 3-5 2018
Fort Worth, TX
Booth# TBA
More Information »

 

Diecasting Congress 2018

Die Casting Congress & Tabletop
October 15-17, 2018 
Indianapolis, IN
Booth# TBA
More Information »

 

Aquapart II

Aquapart® II - Water Based Parting Agent

Use Less Seacoal and Still Get Super Clean Castings
Read More »

Bulletins and Technical Papers for Die Casting Products

Our Sister Companies

HG Logistics LLC

New logistics services from Hill and Griffith

HG Logistics LLC provides logistics management services for the U.S., Canada and Mexico.
Read More »

Griflube Hydraulic Fluids

Griflube Hydraulic Fluids

Environmentally Clean, High Pressure, High Temperature.
Read More»


Murphy Air Sprayers135x100

New Murphy Sprayer for coating and washing

Rugged design assures dependable coverage and maximum efficiency.
Read More »

SaveSave