High-performance, Water-based Diecasting Release Agent for Zinc Diecasting Foundry
Formulated for medium to large, functional and decorative zinc parts, the product provides high quality castings with exceptional cosmetics and will not interfere with painting or plating. The chemically balanced blend of natural lubricants, unique to polymers and wetting additives provide excellent finish and metal flow without incavity or over-spray build-up.
Features
- Excellent release and metal flow
- Will not interfere with painting or plating
- Complete lubrication package
- Chemically balanced
Typical Properties
Appearance: | Off White Fluid |
Odor: | Pleasant |
pH: | 9.5 |
Density | lbs/gal: 8.2 |
Water Solubility: | Dispersible |
Application
This product is designed to be first diluted with water and then spray applied to the mold surface.
Dilution Rates* |
1:X |
Minimum: | 60 |
Maximum: | 110 |
Typical: | 90 |
The correct amount to spray and the proper dilution ratio depends on your individual product and plant needs. A qualified Hill and Griffith representative will be happy to assist you in determining the proper use and application of our products.
*1 part volume Product to X parts volume water
Handling & Storage
Containers | 5gal (18 liters). 55gal (207 liters) and tote quantities available. |
Shelf Life: | 1 year under original seal, unopened containers. |
Disposal: | Dispose of product appropriately, following all federal, state, and local regulations. |
Freezing: | Do not freeze. If frozen, thaw to room temperature by first gentle warming to room temperature an then thoroughly mixing the concentrate product before use. |
Safety & Health: | Refer to the product Material Safety Data Sheet (MSDS) |
Contact us for product information or request bulletins and technical papers.