top of page

<< Return to Mold Department Home

COATINGS 

MOLD DEPARTMENT

EZ KOTE 65

Water-based refractory coating formulated for ferrous and non-ferrous castings.

  • Excellent flow properties

  • Protection at sand-metal interface provides smooth casting finish

  • Can be air dried, oven dried or soft flame torch dried

  • Reduces cleaning room expenses

Recommended Use: For airless sprayers, use 0.43 orifice

​

Base: Water

​

Mixing Information: Product is manufactured in a concentrated slurry.  The product can be easily mixed to desired consistency by adding trim water.

​

Packaging: Drums, Pails

EZ KOTE G PLASTIC

PM

Water-based refractory coating

  • Excellent flow properties

  • Provides refractoriness up to 3000F

  • Reduces cleaning room expenses

  • Excellent coverage for green and dry sand molds

Base: Water

​

Graphite: No

​

Additional Details: Formulation permits the product to be used on small intricate cores up to heavy cores and molds.  The premixed version typically has a Baume of 39.5.  Can  be air dried, oven dried or soft flame torch dried.

FOAM KOTE 2001

High refractory/graphite modified coating

  • Improves workability and consistency providing improved surface finish

  • Minimal settling allows for easy re-dispersion

Base: Water

​

Graphite: Yes

​

Additional Details: The coating is designed to be reduced with water at the customer's facility.  Must be torch or oven dried prior to casting.

MAGIC CAST 353 ZMG

Alcohol-base, zircon/graphite refractory coating

  • Formulated to substantially reduce metal penetration and burn on defects 

  • Supplied in a heavy slurry form

Base: Alcohol

​

Graphite: Yes

​

Additional Details: Can be applied by flow coating, brushing, swabbing or spraying.

bottom of page